Free Material Catalogues

Wardrobe hardware catalogue, sliding systems and internals

Twenty fittings with their kg capacity, the price band and what each one is actually for.

4.9/5 · 127 Client ratings
Updated 19 Sep 2026
✓ Warranty-backed work✓ On-time completion guarantee✓ Design & build under one roof✓ 250+ projects delivered

The full hardware list

The table below is the catalogue as printed — item, the specification to demand, capacity, price band and the note that goes with each.

Wardrobe hardware catalogue — 20 items
ItemSpecification to demandCapacityPrice bandNotes
Top-hung sliding systemTwo-door, soft-close both ways, anti-jump60–80 kg per shutterRs 8,500–28,000/setTop-hung is quieter and does not collect dust in a floor track
Bottom-roller slidingTwo-door with a guided top channel50–70 kg per shutterRs 4,500–14,000/setCheaper; the floor track needs cleaning every week
Three-door synchronisedSynchronised runners, soft-close60 kg per shutterRs 22,000–55,000/setOnly worth it above a 9 ft run
Folding wardrobe systemBi-fold, top-hung25 kg per leafRs 6,500–18,000/setUseful where a hinged swing does not fit
Hinge, 165 degreeClip-on, soft-close, 3D adjustableUp to 12 kgRs 220–620 eachWide angle lets a drawer clear the open shutter
Hinge for a mirror shutterHeavy-duty, soft-closeUp to 16 kgRs 450–1,100 eachMirror adds 4 to 6 kg; ordinary hinges sag
Drawer channel, full extensionSoft-close, side mount35 kgRs 450–900/pairFull extension matters; three-quarter loses the back of the drawer
Tandem drawer for wardrobeConcealed runner, soft-close40 kgRs 2,200–4,500/setWorth it for the two deepest drawers only
Pull-out trouser rackSide-mounted, 10 to 14 pairs20 kgRs 2,400–6,500Needs a 20 in clear depth to work
Pull-out tie and belt rackSide-mounted, 20 positions8 kgRs 1,200–3,200Small and disproportionately useful
Pull-down wardrobe railSpring-assisted, for a loft rail10–12 kgRs 3,500–9,500Makes the top 2 ft of a tall wardrobe usable
Hanging rail, oval25 x 15 mm oval, with end supports—Rs 120–320/rftOval does not deflect like a round rail over 3 ft
Rail with integrated LEDAluminium rail with a sensor strip—Rs 750–1,800/rftReplaces a separate wardrobe light
Shoe rack, pull-outTilt or slide, 4 to 6 pairs15 kgRs 1,800–4,800Angled racks hold more per foot
Accessory tray, velvetIn-drawer, compartmented—Rs 900–3,200Turns one deep drawer into usable jewellery storage
Mirror, sliding on a railFull length, on its own runner12 kgRs 3,200–8,500Better than a fixed mirror shutter in a narrow room
Safe / locker unitConcealed within a bay, 20 litre—Rs 8,500–35,000Needs a dedicated 6A point behind it
Anti-jump and buffer setPer sliding shutter—Rs 350–900The part that stops a shutter leaving the track
Soft-close for slidingBoth-way damper kit—Rs 1,800–4,500/setRetrofittable on most top-hung systems
Loft shutter flap stayGas strut with a hold-open8 kgRs 950–2,600/pairPrevents a loft shutter falling on your head

How to use the catalogue

  1. Choose the system before the internals. Sliding or hinged changes the usable internal depth, the shutter sizes and roughly a third of the hardware budget.
  2. Check the kg capacity against your shutter. An 8 ft tall shutter in 18 mm ply with a mirror is heavier than most people assume, and an undersized system shows it within months.
  3. Buy the small fittings. A ₹1,200 tie and belt rack and a ₹950 loft flap stay are disproportionately useful for what they cost.
  4. Specify oval rail over round. Round rail deflects visibly over a 3 ft span with a full load; the 25 x 15 mm oval section does not.

Three mistakes this prevents

  • Three-door synchronised on a short run. At ₹22,000 to ₹55,000 it only earns its cost above about 9 ft; below that, two doors do the same job.
  • A loft shutter with no stay. It falls on whoever opened it, and a ₹950 gas strut would have prevented it.
  • Ordinary hinges on a mirror shutter. The extra 4 to 6 kg pulls the shutter out of alignment and the mirror stops sitting flush.

Download the catalogue (PDF) →

Read how to plan wardrobe internals and see the wardrobe layout planner.

Frequently asked questions

Sliding or hinged wardrobe?+

Sliding where the room is under about 11 ft and a hinged shutter has no swing space; hinged everywhere else. Hinged gives you full access to the whole opening and costs less. Sliding permanently loses one shutter width of access and takes no floor space, which in a small Mumbai bedroom decides it.

How much does sliding wardrobe hardware cost?+

₹4,500 to ₹28,000 per two-door set depending on whether it is bottom-roller or top-hung and on the shutter weight. For a standard 8 ft two-door wardrobe, a decent top-hung system with soft-close both ways lands around ₹12,000 to ₹18,000 for the hardware alone.

What internal depth does a wardrobe need?+

Twenty-two to twenty-four inches externally, giving about 20 to 22 in clear internally, which is what a hanger needs without the shoulders touching the back. Below 20 in clear, garments hang at an angle and press against the shutter, and a trouser pull-out will not fit at all.

Is a pull-down rail worth it?+

Yes, in a tall wardrobe. The top two feet of an 8 ft wardrobe is otherwise reachable only with a stool, so it fills with things nobody wants. A spring-assisted pull-down rail at ₹3,500 to ₹9,500 turns that into usable hanging space, which is cheap storage by any measure.

Do I need soft-close on a sliding wardrobe?+

It is the single upgrade most worth having. Without it, a sliding shutter closes with a bang against the end stop, and over years that impact loosens the shutter frame. Both-way dampers add ₹1,800 to ₹4,500 and are retrofittable on most top-hung systems.

Related pages

Start your project

Let's design a space worth coming home to.

Free consultation, transparent pricing, and a team that handles design and execution end to end.

📞 CallFree Quote