Mumbai wardrobe rates
| Construction | ₹ / sq ft face | 9 ft high (₹/rft) | 10 ft high (₹/rft) |
|---|---|---|---|
| Laminate on BWP ply, hinged | ₹1,700 – 2,100 | ₹15,300 – 18,900 | ₹17,000 – 21,000 |
| Acrylic or membrane on BWP | ₹2,200 – 2,900 | ₹19,800 – 26,100 | ₹22,000 – 29,000 |
| Natural veneer with PU finish | ₹2,900 – 3,600 | ₹26,100 – 32,400 | ₹29,000 – 36,000 |
| Sliding — WPC carcass, lacquered glass shutters | ₹3,200 – 4,100 | ₹28,800 – 36,900 | ₹32,000 – 41,000 |
Running-foot figures are the face rate × height. Ex-GST. Mumbai slabs are typically 9'6" to 10'0", so full-height units are the norm.
What a Mumbai wardrobe costs in total
| Wardrobe size | Face area | Laminate on BWP | Acrylic on BWP |
|---|---|---|---|
| 6 rft × 9 ft (second bedroom) | 54 sq ft | ₹91,800 – 1,13,400 | ₹1,18,800 – 1,56,600 |
| 8 rft × 9 ft (standard master) | 72 sq ft | ₹1,22,400 – 1,51,200 | ₹1,58,400 – 2,08,800 |
| 10 rft × 9 ft (master, full wall) | 90 sq ft | ₹1,53,000 – 1,89,000 | ₹1,98,000 – 2,61,000 |
| 12 rft × 10 ft (large master with loft) | 120 sq ft | ₹2,04,000 – 2,52,000 | ₹2,64,000 – 3,48,000 |
Face area × the rate band above. Ex-GST, ex-mirror, ex-internal lighting.
Full-height wardrobes under a 9'6" Mumbai slab
Where the money goes — a Mumbai master wardrobe
An 8 rft × 9 ft acrylic wardrobe in a Goregaon tower at ₹1,80,000, mid-band of the ₹1,58,400–₹2,08,800 range:
| Component | Cost | Share |
|---|---|---|
| BWP plywood carcass — 18mm sides and shelves, 12mm back | ₹54,000 | 30% |
| Acrylic shutters on 18mm ply, colour-matched edge-banding | ₹52,200 | 29% |
| Hafele soft-close hinges, tandem channels, handles | ₹27,000 | 15% |
| Internals — rods, drawers, trouser rack, pull-out mirror | ₹19,800 | 11% |
| Carpentry labour, site fixing, scribing to out-of-plumb walls | ₹16,200 | 9% |
| Loft box and shutters at slab level | ₹10,800 | 6% |
| Total (ex-GST) | ₹1,80,000 | 100% |
Why Mumbai wardrobes cost more
| Factor | Delta | What is actually happening |
|---|---|---|
| Carpentry and polishing labour | +9 – 13% | ₹1,100–1,500 a day for a carpenter and ₹1,200–1,600 for a polisher against ₹750–1,000 nationally |
| BWP or WPC carcass mandatory | +6 – 10% | 75–85% relative humidity June to September; MR-grade behind an external wall delaminates within two monsoons |
| Society hours 10am–6pm, no Sundays | +5 – 8% | Cutting and drilling confined to eight hours; a three-wardrobe job stretches from two weeks to three |
| Service lift and board handling | +3 – 6% | 8×4 sheets that do not fit a passenger lift get cut to size off-site, which raises wastage by 8–12% |
| Out-of-plumb walls in older buildings | +3 – 5% | Scribing fillers, packing and site adjustment on every unit in pre-2000 stock |
| Salt air within 2 km of the coast | +2 – 4% | SS 304/316 screws, hinges and rods instead of MS; plain steel rusts through in three to four years in Bandra and Juhu |
Suburb-to-suburb variation
| Area | Acrylic ₹/sq ft face | Local reality |
|---|---|---|
| Bandra West / Khar / Juhu | ₹2,700 – 2,900 | Salt-air hardware, low-rise buildings without service lifts, strict work-hour enforcement |
| Worli / Lower Parel / Prabhadevi | ₹2,650 – 2,900 | Tower managers and lift slots; material staged in the basement and moved in one-hour windows |
| Andheri West / Goregaon / Malad | ₹2,300 – 2,650 | The Mumbai baseline; working service lifts and predictable delivery |
| Powai / Chembur / Ghatkopar | ₹2,250 – 2,600 | Organised societies, good loading bays, standard 9'6" slabs |
| Thane / Mulund / Navi Mumbai | ₹2,150 – 2,450 | Larger bedrooms mean longer runs and slightly better rates per foot |
| Mira Road / Vasai / Virar / Panvel | ₹2,000 – 2,300 | 22–28% below Bandra West for identical construction |
In a 1990s Andheri flat nothing is square. We budget a day per wardrobe just for scribing and packing, and the quote says so — because the alternative is a four-millimetre gap the client looks at every morning.
Greenbox project manager
Specification that survives a Mumbai monsoon
- BWP ply, IS 710 marked, on every carcass below counter height and against any external wall. Ask to see the stamp on the board, not on the invoice.
- Edge-banding on all four edges of every panel, including the ones nobody sees. An unbanded edge is where moisture enters a wardrobe.
- A 10–15mm gap behind the back panel where the wardrobe sits on an external wall, so the wall can breathe and condensation does not sit against the board.
- SS 304 or 316 screws, rods and hinges within 2 km of the sea. Plain MS rusts through in three to four years in Bandra, Khar, Juhu and Versova, and the stain runs down the inside of the shutter.
- Lacquered glass or acrylic rather than veneer in a bathroom-adjacent wall. Veneer and PU need a stable humidity that a Mumbai bedroom does not have in August.
- A loft, always. It is the cheapest storage per cubic foot available and it keeps seasonal luggage off a floor that may get wet.
- Silicone the wardrobe-to-wall junction, do not just scribe it. Mumbai walls move enough seasonally to open a scribed joint.
What a Mumbai wardrobe quote excludes
- 18% GST — on the ₹1,80,000 wardrobe above that is ₹32,400, taking it to ₹2,12,400. Check yours in the GST on interior work calculator.
- Waterproofing behind an external wall — ₹4,000–₹15,000 per wardrobe run, and on a west-facing Mumbai wall it is not optional.
- Society deposit and lift charges apportioned to the job if the wardrobes are a stand-alone scope rather than part of a full interior.
- Mirrors, internal lighting and the circuit — ₹4,500–₹11,000 per mirrored shutter, ₹6,000–₹14,000 for sensor-controlled LED internals.
- Removal of the old wardrobe — ₹3,500–₹10,000 including bagged debris carried down and disposed of under BMC rules.
- Plaster and paint made good around the new unit.
For the national picture see wardrobe cost per sq ft in India, or price your run with the wardrobe cost calculator.
Selected work by Greenbox Design Studio. Tap any image to enlarge.
Frequently asked questions
How much does a wardrobe cost per sq ft in Mumbai?+
₹1,700–₹2,100 per sq ft of face area for laminate on BWP ply, ₹2,200–₹2,900 for acrylic or membrane, ₹2,900–₹3,600 for veneer with PU and ₹3,200–₹4,100 for sliding WPC with lacquered glass — all excluding 18% GST.
What does a wardrobe cost per running foot in Mumbai?+
At the standard 9 ft Mumbai height, ₹15,300–₹18,900 per running foot in laminate on BWP, ₹19,800–₹26,100 in acrylic and ₹26,100–₹32,400 in veneer with PU. At 10 ft under a taller slab, add roughly 11% to each band.
Why are Mumbai wardrobes quoted at 9 or 10 feet?+
Because Mumbai slab heights are typically 9'6" to 10'0" and floor space is scarce, so wardrobes run to the ceiling with a loft rather than stopping at 7 feet. That adds two to three feet of face area per running foot, which is why a Mumbai per-running-foot rate looks high against a national one.
Can I use MR plywood for a wardrobe in Mumbai?+
Not sensibly. Relative humidity runs 75–85% from June to September, and MR-grade carcass against an external or bathroom-adjacent wall typically swells and delaminates within two monsoons. BWP ply or WPC adds 6–10% to the wardrobe and removes the rebuild.
Which Mumbai suburbs are cheapest for wardrobes?+
Mira Road, Vasai, Virar and Panvel at ₹2,000–₹2,300 per sq ft of face area in acrylic — about 22–28% below Bandra West at ₹2,700–₹2,900. Thane, Mulund and Navi Mumbai sit at ₹2,150–₹2,450, and Andheri to Malad is the city baseline.
Do I need society permission just for wardrobes?+
Usually yes if there is any drilling. Most Mumbai societies require an intimation letter, worker ID copies and adherence to 10am–6pm working hours even for a single-room scope, and many ask for a small refundable deposit. It is quicker than a full renovation NOC but should still be started a week ahead.